Footpegs?

Discussion in '610/630' started by feef, Sep 25, 2013.

  1. feef Husqvarna
    A Class

    Location:
    St Neots, Cambs, UK
    Husqvarna Motorcycle:
    TE630 Rally spec
    Other Motorcycles:
    KTM 640 Adventure, FJR1300, BSA M20,
    As I understand it, all Husky footpegs are the same fitment on all models from about 2008 onwards. Is this right?

    Also, would the TE610 hanger /footpeg support bracket be the same item as on a TE630?

    This would be perfect if it'd fit:

    http://www.ebay.co.uk/itm/HUSQVARNA...pt=UK_Motorcycle_Parts_13&hash=item43ac6ff9cf

    Looking at the parts fiche they look the same, and have almost the same part number:

    80A0 87580 on the TE610 and
    80B0 87580 on the TE630
    feef, Sep 25, 2013
    #1

  2. Celt Husqvarna
    A Class

    Location:
    Ukiah CA
    Husqvarna Motorcycle:
    TE630
    feef,
    I have a spare set as I replaced them with Pivot Pegz (they are the mutts nuts).
    You are welcome to them if you cover shipping from California.
    Regards,
    Wayne from Wales.
    P.S. Loved the report by the way.
    Celt, Sep 25, 2013
    #2

  3. feef Husqvarna
    A Class

    Location:
    St Neots, Cambs, UK
    Husqvarna Motorcycle:
    TE630 Rally spec
    Other Motorcycles:
    KTM 640 Adventure, FJR1300, BSA M20,
    Thanks for the offer.
    I've got a spare set of stock pegs already.

    The big question is the hanger bracket.
    feef, Sep 25, 2013
    #3

  4. oregonsage 4st Clerk

    Location:
    Dry Washington
    Husqvarna Motorcycle:
    FX450
    Other Motorcycles:
    Yamaha DT400 x 2, BMW G310R
    Ive swapped pegs between 610, WR300, TE250, TXC449/511 and WR250...I did have to grind an ear off the 610 on the right side. I have little doubt that the 630 will also accept other Husky pegs.
    oregonsage, Sep 25, 2013
    #4

  5. feef Husqvarna
    A Class

    Location:
    St Neots, Cambs, UK
    Husqvarna Motorcycle:
    TE630 Rally spec
    Other Motorcycles:
    KTM 640 Adventure, FJR1300, BSA M20,
    Thanks.. That's what I suspected.

    Any idea on the hanger bracket?
    feef, Sep 25, 2013
    #5

  6. oregonsage 4st Clerk

    Location:
    Dry Washington
    Husqvarna Motorcycle:
    FX450
    Other Motorcycles:
    Yamaha DT400 x 2, BMW G310R
    Should work....the 610-630 changes were mostly about the head and the dual pipes.
    oregonsage, Sep 25, 2013
    #6
    feef likes this.

  7. feef Husqvarna
    A Class

    Location:
    St Neots, Cambs, UK
    Husqvarna Motorcycle:
    TE630 Rally spec
    Other Motorcycles:
    KTM 640 Adventure, FJR1300, BSA M20,
    That's enough for me, and at only £22 it's worth a punt :)

    Thanks
    feef, Sep 25, 2013
    #7
    oregonsage likes this.

  8. RDTCU Husqvarna
    Pro Class

    Husqvarna Motorcycle:
    '11 630SMS
    One of these days I'm going to pick up some grade 8 or better bolts for things like the footpegs and the rear subframe mounts...

    Haven't had any real trouble on my SMS, but I'd assume that's because I spend 95% of my time on pavement. I do stand on the pegs pretty often though...
    RDTCU, Sep 27, 2013
    #8

  9. feef Husqvarna
    A Class

    Location:
    St Neots, Cambs, UK
    Husqvarna Motorcycle:
    TE630 Rally spec
    Other Motorcycles:
    KTM 640 Adventure, FJR1300, BSA M20,
    I can confirm that, other than being silver, the 610 footpeg hangers are identical.

    I've mounted them using some brake caliper mounting bolts that I had lying about from one of my FZR400s as I'm confident that'll be a reasonably strong steel
    feef, Sep 27, 2013
    #9
    Celt likes this.