1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc Fork clamp torque for 50mm Marzocchi's ?

Discussion in '2 Stroke' started by dirt addict, Apr 4, 2014.

  1. dirt addict Husqvarna
    AA Class

    Location:
    Southern Kalifornia
    Husqvarna Motorcycle:
    2014 cr125
    What do I torque the upper and lower clamps to for the Marzocchi 50mm forks? I looked thru my paperwork but couldn't find anything.....
    Thanks.
    dirt addict, Apr 4, 2014
    #1

  2. flyingbob Administrator

    Location:
    USA
    Husqvarna Motorcycle:
    01&02WR360_02WR250_02CR250_12WB165
    Other Motorcycles:
    01 VOR400_07 TM450_22 GG250_07 Tuono
    I've always used 12nm, max 14nm
    flyingbob, Apr 4, 2014
    #2

  3. dirt addict Husqvarna
    AA Class

    Location:
    Southern Kalifornia
    Husqvarna Motorcycle:
    2014 cr125
    ok, thanks.
    dirt addict, Apr 4, 2014
    #3

  4. 268fords Husqvarna
    Pro Class

    Location:
    Powell, Wyoming
    Husqvarna Motorcycle:
    08' TE510'
    Other Motorcycles:
    Honda CRF 100, Kawasaki KLX 110
    16.5 lbs upper, lower 12lbs. Be sure to start low, then proceed to torque at like 10, 12, 14, then 16.5. 8,10, then 12. Don't go past the torque specs or you'll deform the forks. This is for my 50mm zokes on my TE 510.
    268fords, Apr 5, 2014
    #4

  5. dirt addict Husqvarna
    AA Class

    Location:
    Southern Kalifornia
    Husqvarna Motorcycle:
    2014 cr125
    Ok thanks. I'll re-torque to those specs...
    dirt addict, Apr 5, 2014
    #5