1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc Frame guards for 2008 CR125

Discussion in '2 Stroke' started by MattR, Jan 2, 2010.

  1. MattR 2T Forum Clerk

    Location:
    Temperance, MI
    Husqvarna Motorcycle:
    WB165, SM610
    Other Motorcycles:
    Yamaha FZ1
    After one ride, the frame paint is already gone from my boots. So what are you guys using for frame guards on this bike?
    MattR, Jan 2, 2010
    #1

  2. apr250rs Husqvarna
    B Class

    Location:
    Massachusetts

    Attached Files:

    apr250rs, Jan 3, 2010
    #2

  3. MattR 2T Forum Clerk

    Location:
    Temperance, MI
    Husqvarna Motorcycle:
    WB165, SM610
    Other Motorcycles:
    Yamaha FZ1
    I'm more interested in the plastic style guards that extend higher up the sides.

    Thanks for posting the Ad Tek's. They may be a good option if plastic ones are not available.
    MattR, Jan 4, 2010
    #3

  4. john01 Husqvarna
    Pro Class

    Location:
    Powhatan VA
    Matt you can get some grip tape and make your own. I made a cardboard pattern then cut out a two strips for my son's 2010 TC250. He picked up a sheet of 3M sticky on one side and grip tape texture on the other from a place that sells it for skate boards. We then used the pattern I made and cut him two strips out that went up the frame sides where the plastic guards stop. It's really cheap and very grippy if thats even a word LOL. You cound do the same.
    john01, Jan 4, 2010
    #4