Front Axle Nut

Discussion in 'Common Items on Husqvarnas: Tires/tubes/grips/etc' started by tony_dt, Sep 25, 2008.

  1. tony_dt Husqvarna
    AA Class

    Location:
    TX
    Where is the best place to buy an aftermarket Front Axle Nut?:confused:
    I would buy one from George but I just can't seem to hook up with him.:excuseme:
  2. glangston Husqvarna
    Pro Class

    Location:
    Gardnerville, NV and Mammoth Lakes, CA
    Husqvarna Motorcycle:
    2012 Husqvarna TE 310
    Other Motorcycles:
    2012 BETA 350 RS
    If phone # 1 714 540-2920 is not getting it try the email

    uptite@sbcglobal.net

    He's on the phone a good part of the day. I was in today and he was taking calls nearly all the while I was there.
  3. shotgunscott Husqvarna
    AA Class

    Location:
    Twin Falls Idaho
    Husqvarna Motorcycle:
    2008 TXC 450
    Other Motorcycles:
    yamaha,suzuki,kawasaki,scorpa,AJP
    Try Motosportz. I think that they have them in stock
  4. pvduke Husqvarna
    Pro Class

    Location:
    ... on the gas...
    Husqvarna Motorcycle:
    tripple-hondo hoosk...
    Other Motorcycles:
    dozens of them, kicked to the curb
    [IMG]

    Motosportz, ........bling-blang!

    And get the combo wrench too while yer at it.
    Make's getting wheels both off a snap, esp in the field- with just one tool.

    :thumbsup:


    [IMG]
  5. robertaccio Husqvarna
    Pro Class

    Location:
    San Diego, Ca
    Husqvarna Motorcycle:
    2021 Husqvarna TE300i
    Other Motorcycles:
    99 HusqvarnaTE610, 94 Husaberg FC501
    motosportz, I got mine!!
  6. Low Down Husqvarna
    B Class

    Is it $30??
  7. tony_dt Husqvarna
    AA Class

    Location:
    TX
    Thanks for the info! I will give George another try. If not I would like to support Kelly also.
  8. 04asphalt Husqvarna
    AA Class

    Location:
    SW Michigan
    same on all the Husky

    fits the 610:excuseme:
  9. glangston Husqvarna
    Pro Class

    Location:
    Gardnerville, NV and Mammoth Lakes, CA
    Husqvarna Motorcycle:
    2012 Husqvarna TE 310
    Other Motorcycles:
    2012 BETA 350 RS
    I would say yes, just not 100% sure.

    If it takes a 12mm allen then it would likely be the same.
  10. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    yes, for sure.