All 2st front fender decision

hey all can someone give me the links or post up photos of non oem front fenders for the red/white/black huskies please? juicypips destroyed mine(haha sorry mate had to drop that again! ) the other day so need to source a newy & was gona go with something more stylish & modern. which are the easiest fit up with least amount of mucking around/modifications? I think it was RMZ & YZF that more or less fit? GG maybe? don't wanna be making up brackets if I don't have too but if its pretty straight forward & worth the effort I will. cheers

also model years of crossover bikes

http://pages.ebay.com/link/?nav=item.view&alt=web&id=281496790170&globalID=EBAY-AU
Try ebay, loads of hits
I just thought your 300 deserved a more sm look and no not s&m before any wise crackers chip in.

sweet $38 delivered sounds pretty bloody good.

http://pages.ebay.com/link/?nav=item.view&alt=web&id=391103868127&globalID=EBAY-AU
Not sure if 14 plate will fit but its only 4 8mm holes for them washers, you have a template in the old guard juicy took no mercy on smashing into a tree stupid bloke almost like he cant ride!

im think its only the rmz or yzf that fits & maybe GG mate?

There's loads too choose from the hardest part is finding replacment stickers

I put a ktm fender on from th 09-13 exc range. Only had to drill out the 2 back mounting holes a little to slot them out and fit fine. a buddy used the newer ktm fender but had to drill and tap to holes in the front of the bottom triple but otherwise fits and looks good.

ahh nice work Jon clearance was fine on back of fender near frame/rads?

yup no issues with clearance. I also have the trailtech X2 headlight so that mounts up perfect to the ktm fender

I like the looks of the YZ fender better than the stock Husky.

yeh its way old school-like late 80s/early 90s! think I prefer the yzf fender over the rmz, 449/511 & ktm styles but these are still better looking than stock IMHO. just want good fitment so if the yzf is ok fitment wise ill go that route

looks like the 2010-2013 yzf fender will fit with just 2 new holes to be drilled .

I'd like to see that when you get installed, please

this is how it looks the yzf fender

Thanks fredd! And which front plate is that? Nice bike

yeh good looking rig fredd

thats the husqvarna mx front plate

Where are your fork guards? do you rate seal savers?

The neoprene covers ? Yes i rate them but my bike predominatly lives in thick layer of sticky mud thats a yellowy clay mix, i also use a seal doctor ever so often not replaced seals on husky yet its 4 years old to me.

yeh I rate em too. just keep em clean & dry(post washing of bike that is-don't leave em on there dirty & wet as promotes rust/corrosion & ingrained dry dirt/sand can be very abrasive)