G.P.R. Brake lever and more - I'm working for you

Hello everyone, I forgot to tell you one thing. When I brought the bike to G.P.R. have taken measures to make the various parts of the bike special. Among the things there is certainly more interesting in programming in the construction of a brake lever which passes over the platform of support of the foot. For the times they themselves do not I have been able to say anything, but we agreed that when they are ready for the bike will report the last checks. Were then tuned

VERY interesting!

Can not do the popcorn guy but I am waiting to see this too

X2

Great! I bent mine on a rock just the other day. The tang that triggers the brake light switch bent the most, and I rode home trying to figure out what exactly felt different about the rear brake feel-- that's when I discovered my brake light had been on full blast (as if braking) the whole way. I'll buy a remanned lever if it is less than $100. Otherwise I'll buy beer for my welder friend...

And there is the single collector

There we go. Saturday, October 26 will bring the bike back to the GPR to try mounting the rear brake lever with high passage. Hopefully soon we will have a lever that will not go below the platform creating many problems in the off-road! Will update in two weeks!

Unfortunately, tomorrow I will bring the bike to the GPR. And the worst thing is that I can bring it up to November 16. I'm at home with a very strong influence. : (.... I'm sorry guys for the brake lever will we have to wait a month: (

Is this what it looks like?

http://www.gpr.it/accessori.htm?method=immaginiAccessori&idAcc=11

I do not know yet how it will be. But I think that in the picture. Unfortunately, this week I will have contact with the GPR because they are all on the motorcycle show in Milan. (EICMA) soon as I have news I will tell you.

Here I am, sorry for the delay but had not had time to do things. The lever at the end they sent me as a prototype to try to mount. Next week, if I can, mount it and will let you know. If there are problems I'll have to bring the bike to the GPR for further measurements. Anyway here's the first lever with high passage for the brake of the bike!
We will definitely have to mount a switch lever idrostop because with this there will be more space to mount the switch to the stop.

Eccomi, scusate il ritardo ma è mancato il tempo per fare le cose. La leva alla fine me l'hanno spedita come prototipo da provare a montare. Settimana prossima , se riesco , la monto e vi faccio sapere. Se ci saranno problemi dovrò portare la moto alla GPR per ulteriori misurazioni. Comunque ecco a voi la prima leva con passaggio alto per il freno della nostra moto!
Sicuramente dovremo montare anche un interruttore idrostop perchè con questa leva non ci sarà più lo spazio per montare l'interruttore dello stop.

Tomorrow night I try to mount the lever! Wait you know 'say

Hello guys, unfortunately there is' a problem with the prototype of the lever. The attack on the pump does not go well, and then I'll have to 'bring the bike back to take the measurements. I'll keep 'up to date. however, I put a picture where you can see how it will work
Not bad I'd say!

Huh...looks like they just need to jog that brake slave cylinder connection point in a bit.

I for one would be in for this. When they get them finished perhaps we can do a group buy!

+1

Hows the access to the sprocket cover?

I would be interested in both the single collector and the brake pedal, the brake pedal for sure. Please keep us updated on the price and availability, I did not see them on the website. Thank You!

I have written to the GPR but I have not yet been answered. Appensa know something I inform you immediately.
For discharges are already all be purchased through the website www.motochepassione.it Some users of this forum have already bought. Offer each other the information