G2 ergonomics quick turn throttle, A+

i got one of these last week and tested it out yesterday. its perfect for the newer 4 stroke huskies since they lack low to mid rpm power. now my bike acts more like a 2 stroke and gets the rear tire goosey in a hurry

good stuff! took all of that worthless slack out

http://g2ergo.com/shop/catalog/Quick-Turn-Throttle-Tubes-11-1.html

I totally agree! I used one all season on my TC 450 and it worked awesome. Seriously though, with all the talk about the new tc 250 being a little slugish off the bottom, wouldn't an immediate fix for that problem be some gearing changes and one of these throttles......

Blake

I want one for my WR125 badly but he says he doesn't make them for two strokes. I wonder if I could buy one and just get a custom throttle cable made?

I have a G2 with 400 cam on my 2007 WR250.. Which I believe is the exact same.. I talked to the owner of G2 before purchasing from a local shop..
So I'm surprised you were told it would not work..

That's really strange. I talked to the owner too and he is the one that told me he only made faster cams for the four strokes. I already have a G2 throttle so I was only looking for a 400 or 500 cam and he told me he didn't have anything just a few months ago. I'll give him another call, maybe he discontinued them? If it was just a mistake I will happily order one up today. Thanks for the heads up.

I wanted something slower to lessen the hit.. Which is why I am using the slowest cam included in the kit which is the 400 cam (he has another
yet slower cam available).. But if you are needing something with a harder hit.. You maybe correct.. Sorry for any confusion..

Just realized where our confusion was, it's not that I want a G2 throttle cam, I was responding to the initial post of a faster throttle cam. G2 only makes slower throttle cams for the two strokes. He went on a bit about the reasons he won't make one (lawyers, testing, and customers trying to use it for untested applications) and ended on "Ty Davis called me a while back begging for one and I wouldn't make him one". And I'm no Ty Davis

Quit stalking me.. One minute after I post you respond.. FWIW I'm married.. But I do like to get dirt with the boys.. But in a different way though..

Typical stalker failure, following too closely. Have to work on that.

i have used one for a couple of months now.. i tried the 400 but was too long.. i love the hit off the big bore down low but tight S/T was tuff as it wanted to spit me off lol... changed to to the 200 and was a lot better, more in between the 2.. but have eventually gone back to the MX 100 as i really like the short throw now... i reckon i have just gained better control and strength on the bike now but it definately helped when i went from the xr250 straight up onto the 510 ! ps, hated having to mess about with the csrby cables.. also put an "0" ring onto the pumper and that makes it hit even harder ! lol..

I just ordered one from him yesterday and saw this post today! Delrin insert for smoother feel. G2 has great customer service too. Cheaper then a EFI tune to increase low end snap I hope.

most fit them to stop low end snap !

installed mine today, the delrin thing was way to tight so i left it out.
i liked the results, but haven't rode it again after taking all the factory slack out of the cables

what r some good after market grips?

There is not quick turn for 2 strokes as far as I know. I have wanted one or a 1/8 turn throttle.

I am happy with my quick turn after the first ride. I also took some slack out of the throttle cable which eliminated some of the free play in the throttle.

They have 20% off and free shipping right now!

Great deal! Got one in route. Thanks for the heads up!