250-500cc Graphix ?

I ordered number plate backgrounds. I ordered them correctly off the website, but they are wrong. I sent pics of me holding them up to the bike and sent them to the place. They replied back saying it looked like my plates where off a 2007 husky. I have a 2011 WR250. I am pretty sure???? Are the 2007 side panels the same as a 2011?

They appear to be the same, As far as I know the only difference husky has made to side panels is they've removed the tab that covers the airbox. Ie: 2007-2011 cr125.

In what way do your graphics not fit? can you upload the picture?

Just had the same thing happen for my 2013 wr125. Front plate was a good fit but the sides are wrong. They said they used the wrong template and I don't think they have one for it.
They say they will make it right. I cut off everything that was not the number and made it work as the race was today.

Here is a picture. I think the 07 - 2011 are the same but was hoping someone new for sure.

Hi sorry completely off the subject but is your seat the guts high seat foam if so how do you like it. I have been wanting to get a higher seat.

dan s, yes it is a Guts seat. First, quality seems very good. The cover that came with it has tons of extra so you dont have to stretch your nuts off to get it on there, like other brands I have bought. It does seem a little on the soft side for me. Which isnt bad now but I wonder if in a short time it will become too soft and I will be sitting at the old height. I dont know, it might not do that. One other thing I noticed on mine, but have never noticed on the 4-5 other freinds bikes that have Guts tall seats is, mine kinda dips down a little right where I sit. My freinds and others I hav e been checking out are as flat as a pancake when looking at them from the side. Being 6'2" I think I could have use every bit of that dip. But overall I give it a 9 out of 10, just because that dip kinda bugs me and the foam could be harder.

OK thanks yeah I'm 6ft and find sit to stand transition to be cramped even though the bike is tall. I will give it a try.

according to rockymountainatvmc.com website. 2007 and 2011 share the same sidepanels. And those side panels are also the same as the 125's.

http://www.mdracingproducts.co.uk/side-panels-156 This website claims that is false for the 125's but I don't believe so. Regardless it also shows both those years using the same side panels.

5 min on google, and you have 2 sources that say they are the same. If you care to research Polisport/UFO/Cemoto may also concur with what I've found.

Sorry if it sounds rude, It's not implied.

Aviduser, I have already done that, just looking to see if anybody here might have both of the year bikes, or knew someone with an old bike that could 100% verify if it was the same. The guy from the decal company is being an ass. I ordered them correctly off his website but they dont fit. So his reply was that I didnt know what year bike I own. Even after I emailed him pictures of the bike and a close up of the title and sticker on the bike that shows the year, he is saying I messed up.

I don't care what other year mine may fit. End of the day they need to fit a 2013 wr125. Still no word form the guy who made mine.

WR 250/300 number plates same from 06-13

WR/CR125 same 2006-2008, different on the new frame 2009-2013

You guys that had messed up orders didn't order from DecalWorks or PG did you? Hope not because those were the companies I was looking at for a '13 CR 125.

no graphicsmx.com

no but I have used decal works in the past and was happy with them

At this time only the front fits. Cut everything not black off the sides.