GREAT ARTICLE ON FUEL INJECTED BIKES

Discussion in 'EFI/carb' started by hillbilly, Aug 12, 2012.

  1. hillbilly Husqvarna
    AA Class

    Location:
    OZARKS
    Husqvarna Motorcycle:
    11te250 14cr150
    Other Motorcycles:
    17 ktm500
    hillbilly, Aug 12, 2012
    #1
    Phoenix likes this.

  2. OlderHuskyRider Husqvarna
    Pro Class

    Location:
    Austin, TX
    Husqvarna Motorcycle:
    2010 TE 450 - last of the ITA motors
    Other Motorcycles:
    Kwaka KLE, HD FXDWG
    I saw that the other day. He neglected to include the pressure regulator in his diagram, which is as key a component as the quick release is....;)
    OlderHuskyRider, Aug 12, 2012
    #2

  3. hillbilly Husqvarna
    AA Class

    Location:
    OZARKS
    Husqvarna Motorcycle:
    11te250 14cr150
    Other Motorcycles:
    17 ktm500
    I found this the other day after i had the fuel pump replaced and installed foil back insulation under the fuel tank on MY11TE250...! I hope to keep some of the heat out of the fuel tank, seems to be a factor in these fuel pumps going bad.
    hillbilly, Aug 12, 2012
    #3