250-500cc gsrjosh clutch hub

Guys I'm an idiot among lots of others names I can come up with. I broke my clutch hub on my 93 360. Does anyone have one? Also please do not ask how, much appreciated.

by the way the part number is 8A00 48137
any hub 250 or 360 92 to 02 will fit

http://www.motosport.com/dirtbike/o...60/clutch,-primary-drive/clutch-hub/8a0048137

Ty premo. I got the part number already but I never thought to check Motorsport. Any recommendations on clutches?

the truth will set you free so how did it turn out? we need pixs

I may have a few laying around since I have a couple of dead 360 motors.

did you try holding it by the spring mount lugs to undo the center nut?
Did you snap it clean off?
You know you want to tell us.

stickin a penny between the gears works to

sounds like you're saying, been there done that
we find ourselves without the special tools and some broken parts

If you have broken one of the lugs off it can be repaired quite easily - Drill it right through with a 5mm drill and tap it with a 6mm tap, Countersink the back of the hub and fit a counter sunk M6 machine screw and Bobs yer uncle its as good as new and will last the life of the bike out without ever giving a moments worth of trouble. Done it a few times now and NO I have never broke one personaly lol
Does yours look like this ?

Johnnyboy seem to have the pics. Not use to working on cast aluminum.

i mean the bike as a whole

Not myself but watched a friend with cr 250 shear one clean off, good fix johnnyboy will remember that if ever i need it.