Handle bar issue

Discussion in '610/630' started by asi00007, Mar 15, 2013.

  1. asi00007 Husqvarna
    A Class

    Husqvarna Motorcycle:
    TE 630
    Other Motorcycles:
    Suzuki V-strom 1000
    Hi Guys!!

    I posted it on ADV as well

    Iv-got little problem with the handlebar ... I install 30MM raiser to get comfortable while I'm standing on the bike but it still low and I need to bend my back and I cannot adjust the leavers enough to be in the right angle , I have the stoke handle bar and I'm thinking to get a higher bar
    Did someone already did it ?

    Or if someone have another idea I will appreciate alot
    Thanks
    Asi
  2. Kyle Tarry Husqvarna
    Pro Class

    Location:
    Portland, OR
    Husqvarna Motorcycle:
    2012 WR 300, 2006 TE 610
    Other Motorcycles:
    Ducati Monster S2R 800
    I have taller bars on my 610. They are neat.
  3. Boogie Husqvarna
    Pro Class

    Location:
    Australia
    Husqvarna Motorcycle:
    Red head
    Are you standing like this?

    [IMG]
  4. 1lunger Husqvarna
    AA Class

    Location:
    Bloomfield CT
    Get some 2" Rox Risers and the CR high bend bars.
  5. RDTCU Husqvarna
    Pro Class

    Husqvarna Motorcycle:
    '11 630SMS
    You might be the first to end up with ape-hangers on a sumo :p

    I'm 6'3" and don't have any problems with the factory bar and risers, just tweaked the angle a bit, but I'm on an SMS and only stand up to go over some bumps, or the rare occasion that I take a dirt road. Sometimes I'll stand up for a while on the street to "air out" or give my butt a rest.
  6. Kyle Tarry Husqvarna
    Pro Class

    Location:
    Portland, OR
    Husqvarna Motorcycle:
    2012 WR 300, 2006 TE 610
    Other Motorcycles:
    Ducati Monster S2R 800
    Occasional standing up on a supermoto is way different that the amount you should be standing on a dirt bike.

    I honestly don't really know what the OP is asking. There are lots of different bar bends out there. If yours aren't high enough for you, get higher ones?