HDB guards on a 09 WR125

Discussion in 'Motosportz' started by Motosportz, Apr 20, 2009.

  1. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    Got them installed and WOW, very nice. Lots of room for the brake hose with is always an issue with other guards. Went on very EZ and lots of adjustments. I trimmed the bottom of my shields because I liked the look better and don't need them hanging that low. This is nice stuff.

    - Note, you will need to drill the bars ends out as the ID is a none standard and to small for the sano insert.

    Email if you want some motosportz@gmail.com

    [IMG]

    [IMG]

    [IMG]

    [IMG]

    [IMG]

    No brake line issues at all...

    [IMG]

    [IMG]

    [IMG]

    Multi adjustable angle...

    [IMG]
    Motosportz, Apr 20, 2009
    #1

  2. Muddy Waters Husqvarna
    AA Class

    Location:
    On the islands
    I'm surprised you didn't go with the engraving option?
    I think the middle section is just begging to say "Cupcake's Husky" ........

    :D
    Muddy Waters, Apr 20, 2009
    #2

  3. BlueHusky144 Husqvarna
    AA Class

    Location:
    Staunton, IL
    Will you quit adding stuff and just go get it dirty.:D
    BlueHusky144, Apr 21, 2009
    #3

  4. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    ASAP. Freaking work keeps getting in the way. :banghead: i am sooooo chomping at the bit.
    Motosportz, Apr 21, 2009
    #4

  5. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    Some installation pix...

    [IMG]

    [IMG]

    [IMG]

    [IMG]

    [IMG]

    [IMG]
    Motosportz, Apr 21, 2009
    #5

  6. mrkartoom Husqvarna
    AA Class

    Location:
    western Mass
    Husqvarna Motorcycle:
    08 TE610, 15 TE300
    Other Motorcycles:
    03 Beta Rev
    Nice. :thumbsup: I assume that is your own method and do not you have to tap the bar ends to mount those guards? I think I like those guards even better than my Fastways (on my KTM).
    mrkartoom, Apr 23, 2009
    #6

  7. Muddy Waters Husqvarna
    AA Class

    Location:
    On the islands
    No, that's how the kit comes, with the tap
    You just tap, tap, tap it.....:D
    Very easy, extremely secured
    Good value

    :thumbsup:
    Muddy Waters, Apr 23, 2009
    #7

  8. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    Yep, it is an excellent mounting system. :thumbsup:
    Motosportz, Apr 24, 2009
    #8

  9. mrkartoom Husqvarna
    AA Class

    Location:
    western Mass
    Husqvarna Motorcycle:
    08 TE610, 15 TE300
    Other Motorcycles:
    03 Beta Rev
    Very impressive indeed then.
    mrkartoom, Apr 24, 2009
    #9

  10. mtne Husqvarna
    AA Class

    Location:
    Denver
    Husqvarna Motorcycle:
    08' TE610 + 08'TE610 sumo'd
    Other Motorcycles:
    KTM 950SE
    Very nice. But will it work with a motorsportz dampner in the submount position?
    mtne, Apr 25, 2009
    #10

  11. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    Absolutely as it all mounts below. :thumbsup:
    Motosportz, Apr 25, 2009
    #11

  12. Muddy Waters Husqvarna
    AA Class

    Location:
    On the islands
    I'm not sure what am I missing here? :excuseme:
    The threaded insert comes with the handguard system
    And the tap.....

    The small plastic bag on the top left :applause: (BTW that's the 610's version)
    [IMG]

    :thumbsup:
    Muddy Waters, Apr 28, 2009
    #12

  13. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    I'm really liking theses hand guards. :thumbsup: Everyone who sees them are very impressed. Good stuff.
    Motosportz, Apr 28, 2009
    #13

  14. Muddy Waters Husqvarna
    AA Class

    Location:
    On the islands
    :doh:
    I see.............
    I knew I was missing something :busted:


    :thumbsup:
    Muddy Waters, Apr 29, 2009
    #14

  15. rcrinerii Husqvarna
    AA Class

    Location:
    Beggs, OK
    Hey, will these handguards work with a 610 dampner? I've only seen the pics of the over the bar mount for the 610? Would sure be sweet if it would.
    rcrinerii, Apr 29, 2009
    #15