1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc Headlight wiring

Discussion in '2 Stroke' started by Mr_Beat, Oct 10, 2011.

  1. Mr_Beat Husqvarna
    A Class

    I have a 2006 wr125 with headlight but I am not sure how to wire it. No pc right now to look at the manual if it says anything. I have a yellow wire from the regulator and a blue wire. The large bulb has 3 wire leads?? Which is which?
    Mr_Beat, Oct 10, 2011
    #1

  2. Harbinger Hróðvitnir

    Location:
    Tromsø, Norway
    Husqvarna Motorcycle:
    2013 Nuda 900 R
    Other Motorcycles:
    Buell
    Harbinger, Oct 12, 2011
    #2

  3. hogwackr Husqvarna
    AA Class

    Location:
    pennsylvania
    Husqvarna Motorcycle:
    18 TE 250
    Other Motorcycles:
    13 HD Street Glide
    You will hook the blue wire to the right post (when looking at the back of the light) the yellow will go to either of the other two. (dual filament bulb) just see which beam you like better.
    hogwackr, Oct 12, 2011
    #3

  4. hogwackr Husqvarna
    AA Class

    Location:
    pennsylvania
    Husqvarna Motorcycle:
    18 TE 250
    Other Motorcycles:
    13 HD Street Glide
    hogwackr, Oct 12, 2011
    #4

  5. motomaniac Husqvarna
    A Class

    Location:
    Kamloops BC Canada
    Husqvarna Motorcycle:
    2010 WR300
    Other Motorcycles:
    2009 RMZ450 2005YZ250 2001 EXC300
    The yellow wire is for your lighting and accesseries. Your light has high and low beams. Run the yellow wire to just one of 2 parralel prongs (walls), the one in the middle (roof) is for ground, you can just ground it to the upper triple clamp where your number plate bolts in.
    motomaniac, Oct 12, 2011
    #5

  6. motomaniac Husqvarna
    A Class

    Location:
    Kamloops BC Canada
    Husqvarna Motorcycle:
    2010 WR300
    Other Motorcycles:
    2009 RMZ450 2005YZ250 2001 EXC300
    Its just that simple.
    motomaniac, Oct 12, 2011
    #6