1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc HELP Jetting for a JD PWK on a 92 WXC360

Discussion in '2 Stroke' started by Motosportz, Mar 18, 2011.

  1. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    Title says it. Riding tomorrow and thinking of putting a PWK on my 92 WXC360, got any jetting baselines for me? Bike is stock other than a Dynoport pipe.

    thanks
    Kelly
    Motosportz, Mar 18, 2011
    #1

  2. TROFFER88 Husqvarna
    Pro Class

    Location:
    Camas Wa
    I would go CEL #2 or #3 ( I have one ) 42pj 175 -180 main
    TROFFER88, Mar 18, 2011
    #2

  3. wallybean Mini-Sponsor

    Location:
    Montana
    Interesting on the Main. I had a 170 in mine to break in and it was very blubbering rich. I usually am at a 168-165 in the hotter parts of the summer. My altitude is higher but I was doing break-in runs at 30-35 degrees. The 360 sure starts easier with the PWK. I am probably going to send it in to RB Designs for a divider plate after I get back from Boise. You just don't have that carb cracked very wide for very long.
    wallybean, Mar 18, 2011
    #3

  4. wallybean Mini-Sponsor

    Location:
    Montana
    Troffer,

    Other than the main you hit my jetting right on the head exactly. [IMG]
    wallybean, Mar 18, 2011
    #4

  5. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    thank guys, you rule.
    Motosportz, Mar 18, 2011
    #5

  6. TROFFER88 Husqvarna
    Pro Class

    Location:
    Camas Wa
    Walt

    I was just thinking with the pipe and elevation might want to go bigger on main, not really on it that much on the ST so my main suggestion is probablly a bit much.
    TROFFER88, Mar 18, 2011
    #6

  7. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    I am on the main very little on a 360 in the tight woods as well but do find it effects the mid as well.
    Motosportz, Mar 18, 2011
    #7

  8. TROFFER88 Husqvarna
    Pro Class

    Location:
    Camas Wa
    go 172 ???
    TROFFER88, Mar 18, 2011
    #8

  9. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    Funny thing is other than having a red needle I think thats whats in it. Adams 07 WR250 and my 04 CR125 took the exact same jetting and carb. Crazy
    Motosportz, Mar 18, 2011
    #9

  10. TROFFER88 Husqvarna
    Pro Class

    Location:
    Camas Wa
    Thats what I have in mine too , when I switched silencers/winter it was running a little lean so I went up to a 178 main.
    TROFFER88, Mar 18, 2011
    #10