1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

Help Needed - Idle setting on 1984 CR250 Card

Discussion in 'Vintage/Left Kickers' started by RichardParramon, Feb 16, 2021.

  1. RichardParramon Husqvarna
    B Class

    Husqvarna Motorcycle:
    83 WR430 and 85 WR125 and 84 CR250
    Other Motorcycles:
    KTM 504
    Hi all, recently acquired a 1984 CR250 with the standard flat slide carb and for the life of me I cannot understand how to adjust the idle speed. There are no other screws than what is evident in the below pictures. Does anyone know to adjust these carbs idle speed?

    Thanks

    Attached Files:

    RichardParramon, Feb 16, 2021
    #1

  2. wrx Husqvarna
    Pro Class

    Location:
    845 newyork
    Husqvarna Motorcycle:
    1973 to 1986 husky's various models
    Other Motorcycles:
    RM -250 / Buell / Penton 400 mc5
    the idle is set with the screw on the carburetor cap. you better replace that intake boot, looks rotten to me. if not you will have a very expensive rebuild on your hands. good luck with your new project.
    wrx, Feb 16, 2021
    #2

  3. RichardParramon Husqvarna
    B Class

    Husqvarna Motorcycle:
    83 WR430 and 85 WR125 and 84 CR250
    Other Motorcycles:
    KTM 504
    Great, many thanks wrx.
    RichardParramon, Feb 16, 2021
    #3