1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc Help; rear brake master cylinder boot.09 wr250

Discussion in '2 Stroke' started by gwynfryn, Dec 14, 2014.

  1. gwynfryn Husqvarna
    A Class

    Husqvarna Motorcycle:
    2009 wr250
    Part #28.
    Mine is torn and according to Husqvarna New Zealand they are no longer available. Brembo are pretty common and I thought someone may have come across this before and cross referenced one from a KTM etc.
    Thanks. Screen Shot 2014-12-15 at 10.55.09 AM.png
    gwynfryn, Dec 14, 2014
    #1

  2. ajaxauto Husqvarna
    Pro Class

    I just last week got a new one from Halls
    ajaxauto, Dec 14, 2014
    #2

  3. gwynfryn Husqvarna
    A Class

    Husqvarna Motorcycle:
    2009 wr250
    Interesting. Shows how unhelpful the new ktm/berg/husky dealers are in New Zealand.
    Would rather source an alternative part though as freight to NZ is prohibitive .
    gwynfryn, Dec 14, 2014
    #3

  4. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    something that small wouldnt cost much in freight i wouldnt have thought mate. sounds like your dealers over the ditch are about as good as AUS dealers!:banghead:
    shawbagga, Dec 16, 2014
    #4

  5. gwynfryn Husqvarna
    A Class

    Husqvarna Motorcycle:
    2009 wr250
    Have been in contact with Halls and you can not by the boot separately anymore.Jeff said he can sell me a whole master cylinder though which will include the boot!
    Might have to take back what I said about the NZ dealer.
    Back to searching for a cross over part.
    gwynfryn, Dec 17, 2014
    #5

  6. gwynfryn Husqvarna
    A Class

    Husqvarna Motorcycle:
    2009 wr250
    Well found that one off a kdx(nissin) fits better than original.
    gwynfryn, Dec 17, 2014
    #6