Help Wiring Properly A New Meter Instrument

I am trying to add a new gauge . ITS from a yamaha r15
So far I'm working with 2 rows 8 pins each this is the working pins im told to go by

1 2 3 4 5 6 7 8

A B C D E F G H

Pin 1 Acgive (+) Contact
Pin 2 Positive (+) .
Pin 3 Gigi 2
Pin 4 Negative (-) ground
Pin 5 Gigi 3
Pin 6 Gigi 4
Pin 7 Gigi 5
Pin 8 Gigi 6
__________________
ROW 2
Pin A. left turn
Pin B. right
Pin C. Indicator lamp
Pin D. Neutral
Pin E. ECU
Pin F. Kosong
Pin G. Indicator fuel
Pin H Gigi 1
______
I've looked every single hintin towards HELP
can some body verify my wiring colors to match)l)

What does gigi mean. Maybe empty pin

Now my bikes a
2008 Husqvarna! TE 510 ,
I have the unit powered up and I believe its properly done My bike is loaded into the trailer and won't have access till later today..
Can some boty check what ecu color is and neutral indicator and any other proper colors ... or what goes to 1-8 and A-H

Left blinker is sky blue
Right blinker is blue
Indicator far is white
Ground is tapped into a screw on metal surface
power is red.

In my loom I have a red/black
White /yellow
Brown /white
Red
Black
Black
Blue White
Brown
Blue
Yellow i tried reading the schematic and I not sure the fuel

Not sure if I did those correct..

Im not sure which wire is the ecu and neutral