1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

All 2st how do i remove the rear brake pin

Discussion in '2 Stroke' started by motosapiens, May 17, 2011.

  1. motosapiens Husqvarna
    A Class

    Location:
    kuna, idaho
    rear pads r worn. it looks very similar to my husaberg, which requires severe beating to remove the pin. Any tips?

    09 wr300 btw
    motosapiens, May 17, 2011
    #1

  2. kx3089 Husqvarna
    AA Class

    Location:
    western pa
    Husqvarna Motorcycle:
    wr250
    one sharp strike with a drift
    kx3089, May 17, 2011
    #2

  3. ohmygewd Husqvarna
    Pro Class

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    13'Berg FE350, 96'WR360, 01 WR250
    Other Motorcycles:
    Aprilia RSV1000
    ohmygewd, May 18, 2011
    #3
    BadMotoWeazal likes this.

  4. 85 senior Husqvarna
    C Class

    Location:
    virginia
    i thought i was doing something wrong so i read through the manual a million times and i just sprayed some wd40 around the pin and hit it hard and just like kx3089 said hit it hard just make sure you are hitting the pin straight on,it will come out.
    85 senior, May 22, 2011
    #4