1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc How to determine chain size?

Discussion in '2 Stroke' started by eric125, Aug 15, 2012.

  1. eric125 Husqvarna
    A Class

    Location:
    Mass
    Husqvarna Motorcycle:
    2002 wr 125
    Other Motorcycles:
    2005 yamaha r6
    I'm replacing I believe is the stock chain on my 02 wr 125. I can't find a master link on the chain. But I'm looking at a cheap volar chain? Anyone hear or use one? An I believe my chain is a 520 but Is there a Width to determine if it is a 520?
    eric125, Aug 15, 2012
    #1

  2. Vinduro Husqvarna
    Pro Class

    Location:
    Mississippi
    All full sized dirt bikes have 520 chains. Make sure you get an Oring chain.
    Vinduro, Aug 16, 2012
    #2

  3. paddy.t Husqvarna
    B Class

    Husqvarna Motorcycle:
    WRE 125
    Other Motorcycles:
    Yamaha WR200
    Always fit a good quality chain!
    paddy.t, Aug 18, 2012
    #3
    Vinduro likes this.

  4. huskybear Husqvarna
    Pro Class

    Location:
    B.C. Canada
    Husqvarna Motorcycle:
    2010 wr144 with lectron carb, stuff!
    I use a D.I.D. narrow "x" ring enduro racing chain and am very happy with it. It is narrower and lighter than other 520 "o" ring chains and has less drag and wear on the chain guide. I have not had to adjust it since putting it on new 400 km ago!
    huskybear, Aug 18, 2012
    #4

  5. Vinduro Husqvarna
    Pro Class

    Location:
    Mississippi
    I believe I would stick with a DID or EK chain. Parts Unlimited Chains are also very good. Made by a major chain manufacturer.
    Vinduro, Aug 19, 2012
    #5