125-200cc HQ CR125 99 clutch and clutch basket

I reacently bought badly worn Husky cr 125 1999. I dissassembled whole engine, to change bearings and my eye cought up on smashed cluch basket. I want to ask you guys, can I fit Honda cr 125 clutch basket, or any kind of KTM or newer husqies cluch basket in? And another question is, clutch friction plates are about 3mm thick, how much life is left in them?

A honda basket will not work. Check the classifieds on here. I thought I saw some engine parts for sale awhile back. I would replace the friction plates just to be sure. Any 98-13 husky 125 basket will work.

The spec on new discs is 3mm.

There isn't much room for wear so you need to measure them out. I had to put a new clutch in mine and most of the old disks were worn down to about 2.85mm (2 were 2.75)

May I ask you, where I could find some kind of chart for part fitment from other motorcycles?Like: Honda cr cluch 125 plates fit into husqvarna cr 125, husqvarna (any model) 125 piston fits into any other husqvarna 125. I don't want to create a new thread so I ask here.