Husky 1983/84

Guys hi , I have just bought a 1983/84 Husky in parts . The bike was under restoration but due to unforseen circumstances the owner passed on and I am now the owner of the bike .
I reside in South Africa on the East cost and used to race cr 360 and 390 models .

It is very difficult to get parts for Huskey in South africa and desperately need help to complete this bike properly .
Need

Carb
exhaust
plastics
chain tensioners and guide
right hand side sprocket engine cover as well as clutch cover .

What size ( 125, 175, 250, 430, 500, 510 ???) ?
You can find easily used and nos parts on ebay motors .

Get in touch with Andy at
http://www.hva-factory.com/
for loads of stuff, carb at
http://www.allensperformance.co.uk/
I got a brand new carb there
And, post up a resto thread here or no more help !

Mike hi thanks for connecting .
The engine has no number or the frame .
I am having to have the piston measured . What are piston sizes that could help me indentify capacity . Its looks like a big bore .

Send Andy from HVA in the UK an email , he is very helpful and parts are sent pronto

Send pics, there's a lot of people here who know well huskys !

http://www.husqvarna-parts.com/page/page/3737813.htm

http://husqvarnaclassicparts.se/

There's others guys from South Africa on the forum.

If it is air cooled, then count the number of cooling fins on the cylinder, 6-250, 9-430, 10-500. If liquid cooled, you should see a stamp on top of the head as I recall indicating engine size.

We love pictures, so post up.

All of the parts you will need are in stock. Regardless of it being 250, 430 or 500cc!

We have all the pistons in all the oversizes. Go to www.hva-factory.com and download a free parts manual to help you.
These are the bikes we regularly race, so dont be afraid to ask for help.
Daily shipping worldwide by DHL means you get your bits normally in about 3 days!

Kind regards,

Andy Elliott (hva-factory owner)