husky 510 aircooled

hi guy's. new to the forum so here goes,

Am looking to build a 510 motor to go in my 83 cr250 chassis so a few questions,

1/ will it fit and what mods, brackets will i need?

2/ what is a good source for parts for engine and does anyone have any they want to sell or an complete motor?

3 and finally where can i get a full parts list with part numbers and diagrams of motor from?

Thanks guys and hope you can help.

buy a complete bike....much easier

would love too but none in uk and when one does come up people want crazy money !!

Michael Saint from UK proposed me two 510 for sale , one week ago.
Don't know the price.

3+2 :Lot of infos are in vintage tech ref.
1: The 2 stroke 83 frame has a front tube "S" shaped.It need to be squash in front of head exhaust.84 wrlc frame are better,the front tube frame is right. You need to cut the left tube to let the place for the left exhaust and the kick. Or you can built a 2 in 1 exhaust.

thanks, have you Michael Saint email and contact number please?

michael.saint@hotmail.co.uk

You can also look at guide vert about 510.

http://www.leguidevert.com/_V5/visu_sujet-forum-229819-229819-0-hva-510-te-biamortisseurs--n--2.html

The most problem would be at the carb, the four stroke frames of that type(itc shock white) have special modifications for more clearance up high.
I have put the four stroke engine in that frame and it appears you need quite an s shaped manifold or to modify the frame as appears from pictures I see on here.

510,s can fit the 82 and older frames...you will need a welder, and a lathe...

Thierry Laloge 510 te with 82 frame .

Hi storm,
here's some pics from my 510 TE hybrid with 84'wrlc frame.
Hope it's helpful for your 510 project.

Kay

That's whay I said. With a 2 in 1 exhaust, no need to cut the left tube of the frame near the kick.

very nice fabrication work... on both bikes... that air box is art!

hi svens bike - any chance of a close up pic of your 2 into 1 join on the exhaust?(collector box)?
thanks!

Sean,

here some pics of the collector box,but without mounting on frametube.

Kay

Hi Kay,
thanks - superb, some questions -
It is the exhaust stainless?
How did you do the bends? bought or mandrel bent?
is the motor 86 - I see you have milled up the inlet manifold? Or is that to suit the frame?

and normally 2 into 1 is run low (+ special airbox) to narrow the bike, will you using standard te/tc (wide) side covers?

How far along is the bike now - or that is current?

thanks
Sean

Hey Sean,
exhaust is complete stainless,bends bought from a local Dealer.
Inlet manifold is milled up for the 86'motor and to suit the frame! Diameter of tubes around the cylinder 35 x 1,5mm.Tube diameter
away the collector box to silencer is 40 x 1,5mm.
83' 2-stroke Side covers from DC fits perfect at this frame,left side
cover is not to narrow exhaust tube.
Hope the pics shown it.

Kay

Best of luck finding a motor Storm, to fit a 510 into your frame you need a straight downtube I have a 510 mono frame here in the UK that the down tube can be cutt out and welded in place of the offset one on your frame,