Husky in da house.

colder then hells kitchen outside, so i rolled her in, to get ready for AZ.
learned my Mikuni swap lesson...leave them Bings on the old bikes.
if it aint broke,,dont fix it...

And you must be single? I assembled my WR engine last week. I was able to sneak the cases into the dishwasher for the final cleaning, wife was at work and I have dirt on the daughter. My wifes is used to it from my drag racing days though.

weres my stove master welder guy!

View attachment 7939 Some bikes need to be inside I have her and the Husky 430cr in the garage but may get bored....

So when you get to Arizona what is the chances of having to put a letter in addition to that number? That seems to be a very common choice just like 911. Myself I use the displacement of something I have. Do you have to remove that sidestand for the type of event you plan on entering?

it has a letter,,J, ill ride Trials on Sat, trials and MX both Sunday,
its an AHRMA event.
the side stand is just stuck on to hold the bike up, not attached with the washer, pin and spring.
belive it or not ib had that number for many years, just like Bad Brad. he,s 69 K.
thats the factory works bike i told you about, going fast wont be the problem, hanging on might be.
STOVE???hmmmm. id have to get my toes cold to do that...ill have to see if i can fit that in.

Nice bike. Always cool for some reason to see a bike inside the house. The in the kitchen shot is great!

H.fleet,

You are a genius,here i was going to invest in a hot tank,brilliant.

Are you getting any spots on your cases or are you using jet-x for a spot free sheen?

You definately want to use it otherwise the Magnesium will start to oxidize! Dishwasher also heats pistons up nice for a easy wrist pin fittment!

Learning far more in here than I ever would have guessed! I've used the oven before, but who woulda thunk it, the dishwasher.......as a tool....

husq.fleet,

Any other kitchen appliances pull double duty for the man cave?

Blender for pre mix maybe?

Cases in the oven stink, piston pins, bearings and such in the freezer. I sprayed Simple Green on a airbox once and tried the dishwasher, got in trouble for that one. That one measuring cup that had ML on one side was good for fork oil, has a nice lip to pour it in the fork tube also, no funnel needed