1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc Husky TE 410 rear wheel fitment to WR 125

Discussion in '2 Stroke' started by mr.freezer, Dec 28, 2016.

  1. mr.freezer Husqvarna
    C Class

    Husqvarna Motorcycle:
    SM 125 2000
    Other Motorcycles:
    Ducati Monster 620 ie, Suzuki RM 125
    Guys does TE 410 and WR 125 have same wheels?? I need new rear wheel for my WR 125 and I can buy just one from TE 410
    mr.freezer, Dec 28, 2016
    #1

  2. rancher1 Husqvarna
    Pro Class

    Location:
    WA
    What year of 410 and 125 ?
    rancher1, Dec 28, 2016
    #2

  3. mr.freezer Husqvarna
    C Class

    Husqvarna Motorcycle:
    SM 125 2000
    Other Motorcycles:
    Ducati Monster 620 ie, Suzuki RM 125
    TE 410 1998 and WR 125 2000
    mr.freezer, Dec 29, 2016
    #3

  4. juicypips Husqvarna
    Pro Class

    Location:
    gloucestershire
    Husqvarna Motorcycle:
    wr 360. 2002
    Other Motorcycles:
    Gas Gas TxT 300, Yamaha wr250f
    No the 4 stroke hubs are 5mm wider, also I think your 125 will have smaller Axel's do you would need spacers as well.
    juicypips, Dec 29, 2016
    #4

  5. mr.freezer Husqvarna
    C Class

    Husqvarna Motorcycle:
    SM 125 2000
    Other Motorcycles:
    Ducati Monster 620 ie, Suzuki RM 125
    5mm in not much... 5mm off from spacer??... and I think axels are the same
    mr.freezer, Dec 30, 2016
    #5

  6. juicypips Husqvarna
    Pro Class

    Location:
    gloucestershire
    Husqvarna Motorcycle:
    wr 360. 2002
    Other Motorcycles:
    Gas Gas TxT 300, Yamaha wr250f
    5mm on the hub! So the sprocket won't align either get it machined down to correct size and then make a reducing set of spacers for the axel to fit in.
    juicypips, Dec 31, 2016
    #6

  7. rancher1 Husqvarna
    Pro Class

    Location:
    WA
    I was asking the years of the bikes because some years they would be the same.
    rancher1, Dec 31, 2016
    #7

  8. juicypips Husqvarna
    Pro Class

    Location:
    gloucestershire
    Husqvarna Motorcycle:
    wr 360. 2002
    Other Motorcycles:
    Gas Gas TxT 300, Yamaha wr250f
    Yeah still think that combo won't work.
    juicypips, Dec 31, 2016
    #8

  9. rancher1 Husqvarna
    Pro Class

    Location:
    WA
    It will depend on the year. In 2009 the 125s switched to the four stroke hub.
    rancher1, Dec 31, 2016
    #9

  10. juicypips Husqvarna
    Pro Class

    Location:
    gloucestershire
    Husqvarna Motorcycle:
    wr 360. 2002
    Other Motorcycles:
    Gas Gas TxT 300, Yamaha wr250f
    It's a 00 125 an a 98 te410 so no the hub won't fit.
    Just saying.
    What's actually wing with the 125 wheel? Can't you get it re built?
    juicypips, Dec 31, 2016
    #10

  11. mr.freezer Husqvarna
    C Class

    Husqvarna Motorcycle:
    SM 125 2000
    Other Motorcycles:
    Ducati Monster 620 ie, Suzuki RM 125
    I have just SM wheels and now want to swap it for offroad...
    mr.freezer, Jan 1, 2017
    #11

  12. rancher1 Husqvarna
    Pro Class

    Location:
    WA
    A 2000 TE 410 wheel would fit, same hub.
    rancher1, Jan 1, 2017
    #12

  13. mr.freezer Husqvarna
    C Class

    Husqvarna Motorcycle:
    SM 125 2000
    Other Motorcycles:
    Ducati Monster 620 ie, Suzuki RM 125
    Guys.. and what about TE 250 2004 rear wheel?? is the hub the same as WR 125 2000 hub??
    mr.freezer, Jan 18, 2017
    #13

  14. SmokeyExpress Husqvarna
    AA Class

    Location:
    Canberra Australia
    Husqvarna Motorcycle:
    2014 WR300, 1996 WR360,2013 WR125
    Solution!
    1.Find someone with a big lathe who is willing to help you.
    2. Unlace 410 rear wheel.
    3. Skim 5mm off the sprocket side!
    4.Relace said wheel


    Sorted!
    SmokeyExpress, Jan 26, 2017
    #14
    juicypips likes this.