Husqvarna Athena Get Ecu Question

Bought my first bike (13 TXC 250R) and have been searching for an exhaust for it for a while. I found a Husqvarna/LeoVince MEO Replica exhaust for a 2013 TE 250. The part number showed TXC/TE. Exhaust bolted up great and looks good.



I was planning on sending my ECU to Zip-Ty Racing to have it flashed to get the most out of the exhaust. I was originally looking at a JD jetting tuner but after reading on here it seemed flashing the ECU would be the best way to go. In the exhaust kit came an Athena Get ecu for the TE250.
I am assuming this ECU would not work on my bike as the TXC and TE have different injectors. Are there any ways for this ECU to work on my bike or any tuning options for it?

Absolutely mount that ECU, it's the best ECU you con mount on your 250. With that ECU you don't need any map3, she is already mapped and with the software (ask athena) you can do your own maps or load the same map used by the factory race team pilots as Matti Seistola
Can you tell me where you found the combo exhaust and ECU and if I can ask how much have you paid for them

So should work perfect regardless of the difference in injectors? I was lucky enough to find it on Ebay for 525 shipped. Not sure what the original cost for the combo was but I didn't expect it to come with the ECU. As far as maps go I'll reach out to Athena about the software. Mainly just wanting the bike to run good with the exhaust on it.

That ECU is only for 2012 TC 250 and 2013-2014 TE-TC-TXC 250-310 that share the same Keihin throttle body and injector. Sure the ECU has already in the right map for full power and open (Leo) exhaust, it should be plug and run. The price for the E1 world champion kit is of 1392 euros vat exlcuded, so you have done a really great deal!!
Do you still have the ebay link in case there is at least one more left?

Okay I just wasn’t sure because I had read on here people swapping to a Txc ecu and Txc 12pt injector from the te 4pt. I could be wrong and mid read or that could of been on the older bikes.

The link is

https://www.ebay.com/itm/NEW-KTM-Hu...-on-Silencer-TE-250-310-8539379-/402016096704

I believe it’s from the same seller some others on here recently posted about.

Okay I just wasn’t sure because I had read on here people swapping to a Txc ecu and Txc 12pt injector from the te 4pt. I could be wrong and mid read or that could of been on the older bikes.

The link is

https://www.ebay.com/itm/NEW-KTM-Hu...-on-Silencer-TE-250-310-8539379-/402016096704

I believe it’s from the same seller some others on here recently posted about.

Exaclty shane, injector upgrade was for the older models with mikuni fuel injection.
Many many thanks for the link, I've already sent a message to the seller

Thank you for the help. Put the ECU on the bike and just letting it idle and little throttle in neutral I can tell a big difference.