1. 4 Stroke Husqvarna Motorcycles Made In Austria - About 2014 & Newer
     FE = 4st Enduro & FC = 4st Cross

FE/FC Husqvarna TE350 SEM Stator - Single Phase or 3 Phase?

Discussion in '4st' started by Thehappyclapper, Apr 29, 2014.

  1. Thehappyclapper Husqvarna

    Husqvarna Motorcycle:
    Te 350
    Hi

    New to the world of Husky and forums to be honest and could use a little help please...

    I have a Husky TE350 (1992) that has been fitted with a TE610 (1998) engine with the exception of the stator which is the SEM version not the Ducati version, my question: Is the SEM stator a Single Phase or Three Phase output?

    Thanks
    Thehappyclapper, Apr 29, 2014
    #1

  2. HusqRacr Husqvarna
    AA Class

    Location:
    Escondido, CA
    Husqvarna Motorcycle:
    TE511, 10' WR300, 2015 FC450
    Other Motorcycles:
    Ducati 998, KTM 520EXC
    You should be able to just count the wires out if the stator, or going into the regulator. 3 charge wires = 3 phase 1 charge wire = single phass. Don't count the ground and power wires though
    HusqRacr, Apr 30, 2014
    #2

  3. Norman Foley Husqvarna
    Pro Class

    Location:
    Trumansburg, NY... The Beautiful, Finger Lakes
    Husqvarna Motorcycle:
    82 250WR 86 250WR 93 WXE350 03 TE610
    Other Motorcycles:
    '85 Fantic 300 '12 HUSABERG TE250
    Might get a few more answers, if you post this in "Single Cam" section. This section is for Austrian Huskys.
    Norman Foley, May 1, 2014
    #3
    robertaccio likes this.