125-200cc Husqvarna WR 125 '01 Footpegs

Hi all,

First of all I would like to introduce myself in this great forum. I registered here some time ago and usually use your posts to learn more and more about my bike. I ride this Husqvarna WR 125 2001 model:



My problem is that I've the footpegs really wasted and I would like to fit new ones. The problem is that in my area (Barcelona) the only option on footpegs is the original one's for about 80€ (60-70$ aprox). There are many other options but only for Honda, Yamaha, even for Husqvarna WR but only for 07-12 models.

My question is: Anyone knows if the WR 07-12 footpegs would fit my bike? Is there any other footpegs from another bike (I've heard something about Yamaha YZ's ones)?

Any help would be really appreciated.

Regards

They will fit.

So if the footpegs from a Yamaha will fit a wr125 01 what other bike parts fit husqvarnas. Any other's?

the 07-12 pegs also fit my 99, a good thing on an obscure brand

So, it sounds like it would stand to reason that aftermarket pegs like the Fastway Evolution pegs, say for a YZ250, should also fit with some minor modifications? I'd like to get some lower pegs and these Fastway's have served me well in the past:

http://www.promotobillet.com/i-13382285-yz125-250-1998-2010.html

why not buy ones that just plain fit

http://www.motosport.com/dirtbike/2012-husqvarna-te449--FASTWAY-F3-FOOTPEGS

how far can you back in the italians that share pegs? from what i see in this thread from 99-12 they work...is a 95 the same?

Sorry, no

I've used a couple of sets of YZ pegs on my bike, but never heard of anybody putting pegs for other brands on. Do they all fit the same after grinding down the barrel?

Thank you very much for your answers. This afternoon I've gone to a local dealer with my old footpegs and compared with the ones specified for Husky WR 07-12.

They looked much more the same, and I think that they would fit without any modification. However, I've not bought them because they hadn't that slice in the interior part to avoid hitting the pedal break (hope I have explained it quite well). Tomorrow I'm going to another shop who has the following footpegs for Yamaha YZ 125 (for 38€, about 51$):



Moreover, I've looked at Husqvarna official parts catalog for the WR/CR 2001 and the WR/CR 2007 and the code number for the original footpeg is the same for all years, so I don't understand why some aftermarket brands specify those would'nt fit...

Best regards!