1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc Hyde Racing Pipe Guard On A 09 Wr300 Pipe

Discussion in '2 Stroke' started by 726HUSKY, Aug 16, 2011.

  1. 726HUSKY Husqvarna
    A Class

    Location:
    McArthur, Ohio
    I have a 09 wr300 with the pro circuit pipe on it. In the future i want to put the hyde racing pipe guard on it. Has anyone done this? If so does it fit well, perform well etc?
    726HUSKY, Aug 16, 2011
    #1

  2. 726HUSKY Husqvarna
    A Class

    Location:
    McArthur, Ohio
    I'll answer my own question, no one else must not have this setup. I contacted Jay at Hyde Racing and he stated he had no idea. To let them know how it fit. I'm sure it will fit. I hope this helps someone out who might run into a similar issue.
    726HUSKY, Aug 18, 2011
    #2

  3. oregonsage 4st Clerk

    Location:
    Dry Washington
    Husqvarna Motorcycle:
    FX450
    Other Motorcycles:
    Yamaha DT400 x 2, BMW G310R
    I have mounted the Hyde guard on 09 with stock pipe and did a couple of tweaks to make it fit better but it was still not as sanitary as one might like......it did work though.
    oregonsage, Aug 24, 2011
    #3

  4. 726HUSKY Husqvarna
    A Class

    Location:
    McArthur, Ohio
    Thank you! This is one of the main reason i switched from Orange bikes. The ppl here are alot friendlier,
    726HUSKY, Aug 25, 2011
    #4

  5. oregonsage 4st Clerk

    Location:
    Dry Washington
    Husqvarna Motorcycle:
    FX450
    Other Motorcycles:
    Yamaha DT400 x 2, BMW G310R
    We try to be and much credit is due Coffee for creating a cooperative environment...
    oregonsage, Aug 25, 2011
    #5