250-500cc Hydraulic clutch conversion for WR360 - details wanted

Hi, I'm looking to do a hydraulic clutch conversion on my WR360 so I can install a Clake on it.

I've heard of people using Hebo and Magura kits but havent been able to get any specifics.

Has anyone here done the conversion? If so, can you tell me what kit you used, who you got it from and whether you had any issues with it?

Cheers

Pete

On my ever extending to-do list mate but do a search on a hydro for a WR300 (should be in the 1st page of the 2t forum) or Shawbagga as he put a magura hydro on his WR300 - can't see it being too different to a 360 aside from cable length.

http://www.cafehusky.com/threads/hwa-wr-300-2010-and-hydro-clutch.30561/

Jay

hey mate i done the magura hydro clutch mod on my 300,should be near the same on your 360.have a look through this thread i think the second page i posted a how too with pics
the magura kit part no. is 0120683-50 167
http://www.cafehusky.com/threads/2011-wr300-bomb-proof-mods.29288/

I tried to fit a Magura Hydo Clutch to my 1996 360 & I found that it didn't fit, at least not well or easily. The main problem is that there is a coolant hose that is right in the way. The 360 engine is quite a bit different to the newer 250's & 300's. You may be able to fit the slave cylinder is you remove the hose, but it will be a bit of a pain as you would have to drop your coolant. I decided that it wasn't worth it so I didn't pursue it further. Just make sure you can get your money back if it doesn't fit.