1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    TE = 4st Enduro & TC = 4st Cross

is the LED race light they give you a brake light also?

Discussion in '4 Stroke' started by hipsterdufus, Jan 14, 2010.

  1. hipsterdufus Husqvarna
    A Class

    Location:
    KS
    i took the stock brake light off, is the LED race light they give you a flashable rear brake light? or can you make it flash when you hit the brakes

    hip
  2. Parod Husqvarna
    AA Class

    Location:
    SF Bay Area
    I is a LED tail light and brake. Same LEDs with high and low intensities.
  3. hipsterdufus Husqvarna
    A Class

    Location:
    KS
    awesome :thumbsup: i would have installed it sooner, but i was expecting disappointment, lol
  4. glangston Husqvarna
    Pro Class

    Location:
    Gardnerville, NV and Mammoth Lakes, CA
    Husqvarna Motorcycle:
    2012 Husqvarna TE 310
    Other Motorcycles:
    2012 BETA 350 RS
    Yes.

    Here's someone's instructions I saved.

    If using the rear light that came with the power up kit it goes like this,,,,or this is what you'll need to get it all wired up. On the connector on the bike the wires go like this.....the red with the black stripe is the + for the right turn signal..... there is no black wire.... the blue wire is the ground for all the lights including the turn signals.....the lite blue is the + for the left turn signal....the yellow wire is for the running lights....and the green wire is for the brake light....


    Now for the light itself......the red wire is the brake light.....the black is the ground..... and the yellow is the running light..........this info is from an 08 TE450...
  5. hipsterdufus Husqvarna
    A Class

    Location:
    KS
    thanks for the wiring info, i might have that power-up sheet somewhere around here

    sucks i have to pay tax when i tag it, but i cant really trade it without a title
  6. 1kstep Husqvarna
    AA Class

    Location:
    San Diego, CA
    Husqvarna Motorcycle:
    15FE350s
    Other Motorcycles:
    09KTM300xc-w
    When you mounted the race brake light...did you use just the one screw? Looking at the parts supplied it's not obvious (to me at least) how it gets installed. I'm thinking about "customizing" the stocker and see how that goes.
  7. glangston Husqvarna
    Pro Class

    Location:
    Gardnerville, NV and Mammoth Lakes, CA
    Husqvarna Motorcycle:
    2012 Husqvarna TE 310
    Other Motorcycles:
    2012 BETA 350 RS
    I mounted with the three screws through the plastic fender.