Is This My Flasher Unit?

Discussion in '610/630' started by ESP, Jan 30, 2012.

  1. ESP Husqvarna
    AA Class

    Location:
    Burtonsville, MD
    Husqvarna Motorcycle:
    2006 TE610
    Other Motorcycles:
    2008 KTM 300XC-We; 1993 Harley FLSTC
    I bought a 2006 TE610 that I am setting up for a future TAT run. Can anyone here tell me if the small flat square in this picture is the stock flasher unit? I want to go to LED flashers and the unit on the right is a LED flasher unit, but has 2 wires going into a 3 wire connector. Can anyone tell me where I can get a two wire connector, and if the wire have to be matched up a certain way?


    Thank You- Mike

    Attached Files:

    ESP, Jan 30, 2012
    #1

  2. Dirtdame Administrator

    Location:
    Rock Springs Wy
    Husqvarna Motorcycle:
    11 WR300,13 WR125,18 FE501
    Other Motorcycles:
    17 Beta Xtrainer
    The little flat thing on the left side is the stock flasher unit.
    Dirtdame, Jan 30, 2012
    #2

  3. ESP Husqvarna
    AA Class

    Location:
    Burtonsville, MD
    Husqvarna Motorcycle:
    2006 TE610
    Other Motorcycles:
    2008 KTM 300XC-We; 1993 Harley FLSTC
    Thank you. I will try to find the right connector...

    Mike
    ESP, Jan 31, 2012
    #3

  4. uaza Husqvarna

    yes,... I replaced mine with a generic one for LED blinkers.. just had to adapt the cable tip.
    uaza, Feb 1, 2012
    #4