1. 4 Stroke Husqvarna Motorcycles Made In Austria - About 2014 & Newer
     FE = 4st Enduro & FC = 4st Cross

FE/FC Issue with sicass key eliminator

Discussion in '4st' started by Teambft, Oct 1, 2019.

  1. Teambft Husqvarna
    AA Class

    Location:
    Colorado
    Howdy
    Just bought a 2015 FE501S
    When adding the key eliminator, lights come on and stay on.
    Is there not a relay on these bikes?
    Thanks. 084EC469-326E-4FC9-AC94-001316BC7F63.jpeg BCF8F1A3-98E6-4550-AE02-3B843BA9BDE1.jpeg
    Teambft, Oct 1, 2019
    #1

  2. Teambowles Husqvarna
    Pro Class

    Location:
    NorCal
    Husqvarna Motorcycle:
    19 FE501
    Other Motorcycles:
    19 ktm 6 days excf 450 n excf 500
    Are you turning the handlebar switch off also ours will stay on when key is in the on position but go off when you turn the kill switch to off on the throttle side on handlebars
    Teambowles, Oct 2, 2019
    #2

  3. Teambft Husqvarna
    AA Class

    Location:
    Colorado
    Im sure I did - but will double check tonight.
    Teambft, Oct 2, 2019
    #3

  4. Teambft Husqvarna
    AA Class

    Location:
    Colorado
    I may have figured it out. The instructions that came with the Sicass eliminator from Rocky Mountain stated to plug it in the connector that the keyed ignition was connected to. But the instructions on Sicass Racing's site said to plug it into a different connector.....a six pin black connector. So will try that tonight.
    Teambft, Oct 2, 2019
    #4
    Teambowles likes this.