250-500cc jetting questions wr 250

bike is 2000 wr 250, north nh, house at 600 feet rideing elevation 0 to 3000, temp 40-90 f,, tar and dirt roads

finished rebuilding bike took it on test ride ,bike is getting to much gas/oil its smokey & wet

first tank at 32-1 93 oct. full syn premix

jetting- 400 main 35 pilot #60 middle clip how carb was set

will switch to 40-1 or 50-1 next tank to tune

View attachment 12713

Any setting suggestions would be great???

read all setting i could find online all seem to be close

Changing the mix ratio won't do much. If you think it's rich try dropping the needle one clip and see if it gets better. I looks to me like it should be pretty close but when you go that extra little bit it will really wake up.

thinking 390 30 60 just a little worried about hurting it

I have 390,400 jets and 35,30 pilot new on shelve i can use or ?????

Just change 1 circuit at a time if you go to lean just go back where you were before, on that circuit. As long as you don't flog it when it's lean you won't hurt it.