250-500cc just bought my first husky wr300 2010

hi guys i;m from the uk i have just got my first wr300 the parts are a mind field at the moment until i get my around the differant models , what plastics fit this bike i know tc250 05 on fits but if i got a ims tank and put 2012 tank plastics will they fit and any side panel issues, am i right is the 2012 plastics change if so will they fit ,thankyou

Congrats. I'm not sure the TC plastics fit the WR 2-strokes. I have a 08 CR125 husky and a 2010 TC TC250 and the plastics are different as are the seats.

My 2007 SM510R and 2012 WR300 swapped easily-plastics and seat.

From the 08 on models the plastics have changed a little bit.
The radiatorshrouds are ever so slightly changed, they won't fit nice because of it.
The rearpannels and rearmudguard is also quite different.
The lower radiatorpanels are different as-well.

So to recap to 08 the plastics were the same (2t and 4t), the lower radiator panels were different though.

Hi Varagaz, I was in the same situation with an 11 WR250 I bought recently, and bought this by mistake

http://www.cafehusky.com/threads/new-rear-mudguard-for-sale.29698/

I've still got it, if it will fit your bike, let me know, although I think you're talking mainly about rad shrouds.

I'm also in UK, south East, where are you? would be good to hook up with another WR owner.

Actually Crocus Paper it won't fit, you can easily tell by the way it looks around the subframe.
You're mudguard will ONLY fit the newer frames, (4t and 125 besides SMS and WRE).