1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

All 2st Killin' Time With My Wrs

Discussion in '2 Stroke' started by Dirtdame, Apr 18, 2020.

  1. Dirtdame Administrator

    Location:
    Rock Springs Wy
    Husqvarna Motorcycle:
    11 WR300,13 WR125,18 FE501
    Other Motorcycles:
    17 Beta Xtrainer
    So....I have been off work for a whole month now, and have had lots of time to work on projects on my bikes. The weather has been somewhat more rainy than usual this year, so that kept me from rolling bikes out onto the driveway for any projects. But after the weather cleared up a bit, I tackled a couple of projects that have been needing to be done.
    First off, the 125's exhaust has been especially slobbery lately, so it was time to repack that. I really hate this job, but it's either repack or pretend to be a millionaire and buy a new muffler...not really practical or thrifty, so repack it is.
    [IMG]
    [IMG]
    Second , I had added wiring and lighting to my 125 a few years back, and that turned out pretty nice.....
    [IMG]
    ....so I decide to do the same to the 300, which actually came with the "enduro kit" in a box when I bought it new, but when I later inspected the parts in that box, it seemed that some of the pieces, like hardwear mostly were missing. Rather than try to figure out what was needed to complete that kit, I decided to buy the inexpensive Polisport lighting components, a Tusk handlebar switch and a Cycra cable guide to build my project with.
    [IMG]
    I started at the power outlet from my regulator, and wired from there.
    [IMG]
    Into my freshly installed switch....
    [IMG]
    ....to the headlight assembly....
    [IMG]
    ....and from there, back to the tail light wiring. Then added in my ground wires and grounded where the other pre-existing ground were bolted up to the regulator base.
    Slapped it all back together, and ready to go riding....if the riding areas ever open back up again. Gotta have a freakin' kitty decal to top it all off with too.
    [IMG]
    [IMG]
    Dirtdame, Apr 18, 2020
    #1
    PaulD, gaz and Bill502 like this.

  2. Chisler Husqvarna
    AA Class

    Location:
    British Columbia, Chilliwack River Valley
    Husqvarna Motorcycle:
    2010 WR 300 Husqvarna
    I cannot imagine not being able to get out and ride and also from what I hear at certain times also depending on the year bike you have ... green sticker / red sticker ... the headlight looks awesome ... something I’ve been wanting to do ... I’ve found this on Kijiji .... and thinking of buyin it .... but to tell you the truth ... the Polisport looks awesome .... right now I pack a headlamp in my tool pouch ... excellent write up .. does the Polisport attach to the fork tubes I noticed you don’t use the bottom support that’s used with the number plate. 6B57D529-EACC-4B10-9435-18608D4220EB.png
    Chisler, Apr 18, 2020
    #2

  3. Chisler Husqvarna
    AA Class

    Location:
    British Columbia, Chilliwack River Valley
    Husqvarna Motorcycle:
    2010 WR 300 Husqvarna
    By the way both those Huskys are very nice looking rides !!!
    Chisler, Apr 18, 2020
    #3
    Dirtdame likes this.

  4. Dirtdame Administrator

    Location:
    Rock Springs Wy
    Husqvarna Motorcycle:
    11 WR300,13 WR125,18 FE501
    Other Motorcycles:
    17 Beta Xtrainer
    The Polisport comes with various bits of mounting plastic, hardware and of course what I like to use, the mounting straps....as pictured installed in the photo below.
    [IMG]
    Dirtdame, Apr 18, 2020
    #4
    rockdancer and Chisler like this.

  5. rockdancer Husqvarna
    Pro Class

    Location:
    Sunshine Coast, Australia
    Husqvarna Motorcycle:
    2013 WR125, 2019 FE350
    Nice rides - great choice. Good time to see you are still loyal to the brand . You allowed to ride or travel ?
    rockdancer, Apr 18, 2020
    #5

  6. Dirtdame Administrator

    Location:
    Rock Springs Wy
    Husqvarna Motorcycle:
    11 WR300,13 WR125,18 FE501
    Other Motorcycles:
    17 Beta Xtrainer
    Not so much. All parks, beaches, lakes, riding areas are closed in my county, but I know of some places to the north where a plated bike can still go.
    Dirtdame, Apr 18, 2020
    #6

  7. rockdancer Husqvarna
    Pro Class

    Location:
    Sunshine Coast, Australia
    Husqvarna Motorcycle:
    2013 WR125, 2019 FE350
    yes , similar here . But you are only supposed to travel for essential purposes .
    rockdancer, Apr 18, 2020
    #7

  8. Dirtdame Administrator

    Location:
    Rock Springs Wy
    Husqvarna Motorcycle:
    11 WR300,13 WR125,18 FE501
    Other Motorcycles:
    17 Beta Xtrainer
    Well....it's essential that I ride my motorcycles.
    :thinking:
    Dirtdame, Apr 18, 2020
    #8
    2premo and rockdancer like this.

  9. Huskynoobee CH Sponsor ZipTy Racing

    Location:
    Castaic, CA
    Husqvarna Motorcycle:
    2011 TE449 2006 WR250
    Other Motorcycles:
    HDUltra Classic IT200 YZ250 SV650s
    Yes you do... There is hope up here
    Huskynoobee, Apr 20, 2020
    #9