TE/TC Klotz Techniplate Synthetic 2-Stroke Oil - TC-W3 KL-302

Anyone using this oil?

I have a quart to try and am curious if anyone else is running it.

How clean is it if you aren't on the pipe constantly.

use it up Man oil is oil !

Not looking for debate just anyone with product experience.

ive run the super techniplate which is the same as what you have but is 20% benol castor added...the plain techniplate should be a clean good oil. ive run the super for years and its fairly clean.
as usual, the accuracy of your jetting will greatly help determine spooging and buildup..

Thank you for the info.

Klotz= another high quality oil blender/producer of high performance oils. I can't imagine you can wrong with one of their products. I have never used their line.
Suggestion contact Klotz and ask tech questions, I'm sure they are very accessible for customer service/tech info.

I'm a Maxima user now mostly due to the fact that they are a local company and it's easy to access their tech line.
All these companies create good high specification overkill moto products, Klotz, Amsoil, Maxima, Spectro, BelRay, Motul, etc etc

I've used it and it's very good... just like every other modern oil I've used in the past 20 years. Can't think of a "bad" oil, actually.

Thanks for the info. Appreciate it.

The modern oils are so good that engine protection is not my concern. I typically choose one by how it smells. Some are annoying and some are yummy. The Klutz oils are yummy.

especially when some race gas is involved. mmmmm

I ran Klotz for years, and found the Techniplates ran cleaner than R-50. All smelled good. But it really only matters to the guy who's behind you.