Kouba Link

Discussion in 'TR650' started by Pedro Cayuela, Jan 27, 2014.

  1. Pedro Cayuela Husqvarna
    B Class

    Location:
    Kent, UK
    Husqvarna Motorcycle:
    Terra
    Other Motorcycles:
    Moto Guzzi V7 Scrambler
    Anyone used one on their Terra? If so how easy it to fit, how does it affect handling etc? Any advice welcome.
    Cheers
    Pedro
  2. Scutler Husqvarna
    AA Class

    Location:
    SF Bay Area, CA
    Husqvarna Motorcycle:
    2013 TR650 Terra
    Other Motorcycles:
    TW200 Sold, 2009 SuzukiGS500F Sold
  3. mag00 Husqvarna
    Pro Class

    Location:
    Tucson
    Husqvarna Motorcycle:
    Terra, Strada
    Other Motorcycles:
    XR250 R1100RS CH50
    Real easy to install. Just keep everything clean. Jack it well and safely under the engine to get the back wheel off of the ground. After you have the nuts off the link, the bolts pop out easy with a little prying up and down of the rear tire (a shovel worked perfectly).

    Reverse for the installation. Make sure you put the grease fitting in the right position as outlined on their website.

    DSC07850.JPG

    I haven't driven mine yet, still healing, but it does put the bike lower, 1" and the front forks lower very easy.
  4. AUS_TR650 Husqvarna
    AA Class

    Location:
    Australia
    Husqvarna Motorcycle:
    TR650 Terra
    Other Motorcycles:
    2008 KLX250S
    I installed a 1.75" link awhile back. Easy to install as per instructions above. Don't forget to readjust your chain and slide your forks up else it won't turn in. I pushed mine up 3/4" as recommended.
  5. Greg Jetnikoff Husqvarna
    AA Class

    Location:
    Bundaberg Australia
    Husqvarna Motorcycle:
    TR650 Strada
    Other Motorcycles:
    BMW F80R
    Goes in a straight line really well though...lol