FE/FC light kit for fx

does anyone know what is involved putting a headlight and tail light on a 2017 FX 350? any stator tweaks?

Depends. The stator in the FX is the same one that is in the new FCs and KTM SX and XCFs. The stock stator puts out just enough to power the base requirements of the bike plus a small reserve (20 Watts per Baja Designs) . The reserve may be enough to power a low draw light set up - Sicass makes one for the KTM, but you'd have to piece one together for the Husky. Now if you add grip heaters or a fan as well (the trail tech fan draws 30Watts) you are asking for trouble in my mind, especially on a bike with no back up kick starter. Safer bet would be to put in a higher output stator or to have the stock stator rewound.

I found no upgraded aftermarket stator for these bikes. A rewind is your only option.

http://www.trailtech.net/catalogsearch/result/?q=stator

call them I'm sure they will have them spec'd for the all new engines, if these arent already.

Baja designs is another source, for upgraded power stators. plug and play
http://www.bajadesigns.com/pc_combi...ke~ p.optional7~stator)&search_keyword=stator

That is TBD on the new bikes, but I'd bet one could do it. On the last generation it was possible, but perhaps not cost effective. Using the FE/EXC stator required adding a spacer, plus several other parts. I haven't priced the components out my self, but read that it was significantly more expensive than a rewind or trail tech stator.

This is what I was thinking.