Linkage Bearings 2010 Te 250

Discussion in 'General (Main)' started by Jimmy250, Feb 8, 2015.

  1. Jimmy250 Husqvarna
    AA Class

    Location:
    North Jersey
    Husqvarna Motorcycle:
    2010 TE 250
    Other Motorcycles:
    Polaris Quad
    Smooth job today to make the winter go by and the riding season seem closer! Replaced the linkage bearings with the kit from All Balls! Super smooth and easy as long as you have a press or in my case a good friend with one ! image.jpg

    Attached Files:

    Jimmy250, Feb 8, 2015
    #1

  2. Jimmy250 Husqvarna
    AA Class

    Location:
    North Jersey
    Husqvarna Motorcycle:
    2010 TE 250
    Other Motorcycles:
    Polaris Quad
    Husky Tom Garage.jpg Bearing 2.JPG Bearing 3.JPG
    Jimmy250, Feb 8, 2015
    #2
    ray_ray likes this.

  3. Drew Smith Husqvarna
    AA Class

    Location:
    Hope N.J. U.S.A.
    Rock On Jimmy! Grease the barrings often.
    Drew Smith, Feb 10, 2015
    #3
    Jimmy250 likes this.

  4. Jimmy250 Husqvarna
    AA Class

    Location:
    North Jersey
    Husqvarna Motorcycle:
    2010 TE 250
    Other Motorcycles:
    Polaris Quad
    Drew this maintenance was per your advice last winter! Ha Ha thanks for commenting and the great advice! By the way the Suspension is on the Money!!! See ya around Drew!
    Jimmy250, Feb 11, 2015
    #4