250-500cc Linkage oring replacement

Reassembling my linkage yesterday i didnt notice the side not visible to me I chewed up on those tough orings while tapping the linkage into the swingarm. I tried fixing it but its pretty much trashed. I don't want to buy a whole new linkage kit just to get a replacement oring. Problem is these orings have like a tough metallic inner layer so just going to local hardware store I assume is out.
Suggestions on where to get a single oring?

All the parts are available individually from a Husky dealer.

Which ones are you talking about? I only know of two O-rings in the linkage system and they are on the shock mounting point. Those are just standard O-rings you should be able to find at a hardware store.

yeh what motorhead said. just did mine the other day as took the shock out. replaced the 2 orings on bottom shock mount as one had been pinched & split. $6 for a pack of assorted orings from autostore. didn't see any other orings, rest are just flat seals?!

cool, i didnt know if you could use any oring from auto store because i found out the hard way those things have a hardened center in them like a steel belt tire or something.