Look at these babies! (Or sometimes it's the little things)

Discussion in 'Common Items on Husqvarnas: Tires/tubes/grips/etc' started by shilo020, Jun 15, 2013.

  1. shilo020 Husqvarna
    AA Class

    Location:
    Redlands, CA
    Husqvarna Motorcycle:
    TE310 2010
    I bunged up the heads on the screws to the clutch reservoir. I shopped and shopped for a better screwdriver then realized why don't I find a better screw. This was easier said than done. I found them ok but only in industrial quantities. Finally found these at MR METRIC. And got a matching set for the brake reservoir.

    A-2 Stainless M4 x 0.7 x10mm flat head in-socket machine screw. 20mm on the brake.

    Small triumph but cool!
    image.jpg image.jpg
    shilo020, Jun 15, 2013
    #1
    duggoey, gots_a_sol and bdl507 like this.

  2. B3NO-511 Husqvarna
    AA Class

    Location:
    Perth Australia
    Husqvarna Motorcycle:
    Trail/Tard TE511 FX350
    Good stuff!
    Those things shit me.

    Another good one is Stainless bolts for front discs. Shiny ones instead of rusted.
    B3NO-511, Jun 17, 2013
    #2

  3. 310huskyTE Husqvarna
    Pro Class

    Location:
    Melbourne Australia
    Husqvarna Motorcycle:
    2014 FE 350, 2011 Meo.
    Other Motorcycles:
    67 CR250, 71 400 Cross, 78 CR250
    Dam it!! :mad: going by the thread title, i was hoping for something different. :rolleyes:
    310huskyTE, Jun 17, 2013
    #3
    duggoey likes this.

  4. huskyfrk Husqvarna
    AA Class

    Location:
    los alamitos Ca
    ^^ i was thinking the same thing, either umbrella girls or puppies....
    huskyfrk, Jun 17, 2013
    #4
    310huskyTE likes this.

  5. 310huskyTE Husqvarna
    Pro Class

    Location:
    Melbourne Australia
    Husqvarna Motorcycle:
    2014 FE 350, 2011 Meo.
    Other Motorcycles:
    67 CR250, 71 400 Cross, 78 CR250
    Haha! I swear I never saw the bit in brackets either!
    310huskyTE, Jun 17, 2013
    #5

  6. shilo020 Husqvarna
    AA Class

    Location:
    Redlands, CA
    Husqvarna Motorcycle:
    TE310 2010
    I should of had a show model holding the screws.
    shilo020, Jun 17, 2013
    #6
    310huskyTE likes this.