looking for 2011 TE 310 with TXC ecu and 12 hole injector settings

I just got a 2011 TE 310 with the TXC ecu and 12 hole injector. It also came with a Akrapovic exhaust. I have the I Beat tool. I want to check the tps and co1 co2 co3 settings. What are the settings that are a good to run 0-3000 elevation?

Go through this thread.

Don't think '11 or '12 much different.

http://www.cafehusky.com/threads/2012-te310-ibeat-co-settings.45960/page-3

Also, the FI settings are fine even up to 8000''. Nephew and I both have '12 TE310, mine is TXC and 12pt. Both adjusted well to altitude and pretty cold temps this last week in Mammoth Lakes, CA.

Read through this thread but did not see any info for the TXC ecu and 12pt just stock TE and 4pt

R Little and one other guy posted some #'s

http://www.cafehusky.com/threads/2012-te310-ibeat-co-settings.45960/page-3

I think mine were 106 103 100. I have iBeat and can check them but am on vacation till Fri.

I looked at it again and the #s seemed to be with the TE ecu and 4pt. It would be great if next week you could give me your co#s and tps setting.
Thanks Wayne

1st set the TPS to 102.3 at WOT.

Should be about 970mv if memory serves.

If you run the SA screen 100 100 100 might work fine. A little higher if no SA.

The TPS is critical. I've seen a few bikes way off.

Did you post #'s on a TE 310 with TXC ECU and 12 pt. Injector or a stocker with 4 pt.

OP, I will try and get the #'s but realized I'm not bringing that bike home this week so will be awhile. I'd agree 100 across would be a start then ride test. George (Uptite) did mine and I'm sure that's how he settled on the #'s, taking it around the block a few times.

No problem winter time here when you get a chance to check will be great