It seems that Husky put a cush hub on the TE610s for some years previous to 2006. I read somewhere that one just needs to change the bearings to make it work for a later model 610 (2006 SM in my case). Anyone out there in Husky land have one of these hubs or a rear wheel with one they'll part with? Thanks, Ross scoboniATcomcastDOTnet Seven O Seven 9 three 3 seven 4 seven 8
I took a KTM cush hub for a 525 (woodys wheel works) but I think a stock cush from a 640 would work too. All that was needed was a bearing swap to match the inner diameter to the axle.
It makes a huge difference in tire, chain, and sprocket wear (among other things) on these big singles. Check out this thread http://www.cafehusky.com/threads/kush-sprockets-for-the-husky.34546/
