Looking for information on power up kits

looking for technical info on power up and so on

OK...I'll bite...I have an 08 TE 450

So, the powerup kit takes what is an otherwise mild mannered bike and turns it into a fire-breathing dragon. My bike has loads of power with the kit installed. The downside is your bike will need more maintenance. More frequent oil and air filter changes etc. Also, now that the bike hits harder and revs faster it puts more strain on the engine. Basically, it becomes a dirtbike.

The lambda sensor (02 sensor) is removed and the hole is plugged
the leads to the lambda sensor are plugged into a capacitor
an Arrow pipe replaces the stocker
a "free breathing" air filter replaces a more restricted one
an LED tail light replaces the stocker

The information should be in the workshop manual which can be had for $10 on a CD from your dealer. There are good instructions for installing the kit and pictures tooooooo!

Items are more or less what poster above has stated. Bike is de-tuned to under 20hp or thereabouts for emissions. 33hp or so after power up.

Hi Glangston

Is the info for the 610 Power-up kit available in the manual?

Cheers

Craig

http://www.husqvarnaoutlet.com/repair_manuals

Haven't checked out the manual for the 610's

Just came across these manuals on pdf. Maybe they will be helpful.