Looking for the correct way to fill cartridge body (45MM Marzocchi SHIVERS)

Discussion in 'Common Items on Husqvarnas: Tires/tubes/grips/etc' started by Scott Stanford, Sep 21, 2011.

  1. Scott Stanford Husqvarna
    AA Class

    I have an 06 CR125 with the 45mm dual chamber forks. I'm changing the fork seals/dust seals. Does anyone know the correct method for refilling/bleeding air out of the valving chamber (Cartridge body) ?
    Scott Stanford, Sep 21, 2011
    #1

  2. robertk61 Husqvarna
    A Class

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    09 WR250
    robertk61, Sep 22, 2011
    #2

  3. R_Little Husqvarna
    Pro Class

    Location:
    NJ
    Did not think the 45s were dual chamber?

    I have an FBF set on my 135 with the TIN coated fork legs and they are open style?
    R_Little, Oct 6, 2011
    #3

  4. Fat Tire Flyer Husqvarna
    AA Class

    Location:
    Canada
    My 2006 Husqvarna WR250 has Marzocchi 45mm Shiver Forks.. Think it's the same for a 2006 Husqvarna CR125 (but not sure)..

    This is the service manual I used when I overhauled them last year: Marzocch 45mm Shiver Fork Service Manual..

    Hope that helps.. Good luck and cheers.. :cheers:
    Fat Tire Flyer, Oct 6, 2011
    #4

  5. Parh 474 Husqvarna
    AA Class

    Location:
    Newbury Park, CA
    Husqvarna Motorcycle:
    '73 Cr125, '06 Cr125/144
    Other Motorcycles:
    Ossa, Bultaco, Puch, Maico, AJS, Yam
    I have a '06 Cr125 and it has dual chamber Marzocchi 45s with the Kazima coating.
    Parh 474, Nov 9, 2014
    #5