1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

250-500cc Lost 2013 wr300 kickstarter nut

Discussion in '2 Stroke' started by GhostRider32, Feb 4, 2018.

  1. GhostRider32 Husqvarna
    AA Class

    Husqvarna Motorcycle:
    14 WR300
    Other Motorcycles:
    03 KX250
    Hi guys, I lost the nut that holds the kickstarter on. Can someone tell me where I can get one and also tell me what the thread size is? Thanks.
    GhostRider32, Feb 4, 2018
    #1

  2. LBBKserg Husqvarna
    A Class

    Location:
    Washington
    Husqvarna Motorcycle:
    2010 300wr
    Other Motorcycles:
    05crf450,07yzfr6,08xcf-w250,01exc525
    LBBKserg, Feb 5, 2018
    #2

  3. GhostRider32 Husqvarna
    AA Class

    Husqvarna Motorcycle:
    14 WR300
    Other Motorcycles:
    03 KX250
    Thanks.
    GhostRider32, Feb 5, 2018
    #3

  4. taps Husqvarna
    AA Class

    Location:
    TX
    Husqvarna Motorcycle:
    '94 WXC360
    Other Motorcycles:
    '15 RMZ450, '08 RM250, & '74 MX360
    Btw, it is a m10x1.25 flange nut if someone is looking to get out of a bind while waiting on an order. Mine was a regular nyloc nut when I purchased it. A previous owner liked allen head bolts and nyloc nuts so I'm slowly getting everything swapped back from that.
    taps, Feb 11, 2018
    #4

  5. 2premo Husqvarna
    Pro Class

    Location:
    Northern NV
    Husqvarna Motorcycle:
    98 WR360, 1987 WR430, 1988 XC430
    Other Motorcycles:
    Sherco 300, 2002 KTM 380EXC
    FYI in the future use Locktite
    2premo, Feb 11, 2018
    #5
    taps likes this.