Mag Footpegs

First I should introduce myself as I've been mostly lurking... have 4 huskys: 2 restored and running '67 & 71 250 and 2 projects waiting '67 360 and '74 mag. I've been trying to find a good footpeg setup for the mag and recently bought these

http://www.pentonpartsusa.com/3b 11 KTM frame.htm

well, they fit the bolt together but won't work on the '74. Has anyone had any luck with Husky Junks IMS pegs? I've done a search and seen some disappointment with using them on later models. Also saw someone that did a sweet mod using later model YZ pegs. Any suggestions?

Great forum and look forward to participating. Always wanted a Husky when I was trail riding in the desert in so cal in early 70's. Guess I got there finally!

rick

Hi Motorick,

I needed footpegs for my '73 cr400 as the original ones I had did not look like too much use... I paid $15 on Ebay for the following:

1987 Husqvarna 430 Footpegs XC (probably common to all bikes of the era)

They work great and fit right up .... I could not use the return spings that the later bikes are fitted with but that does not matter too much to me. They do not look out of place on an older bike.

Tom