We have husky WR250 / 300 specific bolt on hydro clutches now. Just an FYI, email me if interested. thanks Kelly Mz
Hi Kelly, I couldn't find the kits on the website and I'm interested but have a few questions. What's the best way to get ahold of you guys?
Email is usually the best as we are a small company spread across three locations. (Sales/ Manufacturing / inventory) We do have them. BTW we are int he middle of a HUGE site upgrade with lots of cool new stuff and a MUCH better layout. Thanks, Kelly Mz
how much shipped to australia? do they come with a braided line? whats the comparison with the stock cable like?
I do not ride a 250 at this time, but in all honestly, how is the pull when compared to a stock 250 with the clutch arm if my mind serves me correctly 3/16ths or 5/16s of and inch. On my old ones it pulled like butter with this mod and still did not stall. Thanks
I always took my 250 Huskys (Last one I did was and 04 I believe) and cut the clutch arm and made it either 3/16ths or 5/16ths of and inch longer. I think it was 3/16ths. Back then the stock clutch cable also was not the best and I was using a motion pro terminater clutch cable. Bike still did not stall and the thing pulled with one finger! If the hydro unit has a hard clutch pull, then I see no advantage to it. Has anyone used this setup? Does it pull like butter?
before i drop a few hundred bucks with you guys for one of these clutch set-ups tell me definitivly-are they significantly lighter pull than stock cable? i.e. are they similar in feel to the husky 4 stroke clutches? gotta know whether its worth a divorce when the missus finds out i bought one! getting conflicting reports so no BS please.
mine is "almost" light enough for just my pinky to pull it in. Seriously. When you first put it on it doesnt feel that much light until the engin is running and it gets even smoother and easier
hey thanks for the input firecrotch i just wanted to know for sure. is yours the magura assembly? was it easy to install-can average joe do it? this may be a stupid question but they do self adjust freeplay/bite point like the ktms dont they? thanks again mate looking forward to gettin one!
yeah it was the same magura and I bought it used from a guy on this forum with no instructions and still figured it out. Had it installed and working within an hour...and I am a guy who is a complete mechanical idiot too
We have a couple of customer complaints with these clutches and some recent changes from the maker as well. There are 2 different complaints we have had. #1 The clutch cable holder (part of the main case) has to be drilled out to a larger size to accept the new slave cylinder. #2 the set up on some bikes drags on the main case and is noticable on the pull of the lever. There has also been a substantial price increase as well on these units. If it still sounds like something that you want shoot me a PM and I will help you out. Mike.
thanks Mike. I was holding off to get the whole story and there it is. really not doing much with these right now. Sorry for the delayed response.
