1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

Mikuni carb

Discussion in 'Vintage/Left Kickers' started by Torq, Mar 25, 2016.

  1. Torq Husqvarna
    B Class

    Husqvarna Motorcycle:
    1974 wr 250
    Tired of the bing!!! Want to go with a mikuni. 1974 wr 250...how do i adapt the intake and the air bell for the mikuni? Found some for mag engines but none for anything else.....thanks!!!
    Torq, Mar 25, 2016
    #1

  2. disonny Husqvarna
    AA Class

    Location:
    upstate ny
    Husqvarna Motorcycle:
    73 360 wr/rt, 75 wr250 78 cr250,
    Other Motorcycles:
    83 wr250, 84 wr400
    You can find a rubber front mount on ebay or maybe one of the vintage parts suppliers. Does it have a reed valve? If so you can find used reed blocks on ebay. The one you would need would be the back piece with 2 bolt holes in it and the rubber boot would bolt to it. As for the bell, I cut an inner tube and fit it around the carb and slid the bell on. You might have to try a couple tubes, I think I used a HD tube but not one of the real thick ones.
    disonny, Mar 26, 2016
    #2