Modern Hub on a Nordisk Rim

I was wondering if anyone has experimented with using a modern 2010-13 Husky hub on a vintage Nordik rim. I was wanting to keep an original style rim on my Ae with the new front end.

Thanks

If anyone could lace it up it would be Buchanan’s.

my memory keeps going back to a thread on this, but can't remember what started it or how far back it was
but it is in the older threads

Thanks, I looked but didn't go way back. Been busy working on the SM430. Finally got it ready for tires.

Thanks, I'll check them out.

I think you could do it. Use the spokes that match the hub, use a standard 4-cross pattern. Once centered and trued, check whether the spokes poke up past the end of the nipples then grind them flat if they do.

I was kinda thinking the same thing. I'm going to unlace a spare 86 wheel try and use the spokes and the rim. I measured the spokes and the hubs. They do seem to be the same if not extremely close

Can’t say for sure with a new husky hub but tried to lace a 05 Ktm hub into an 85 nordisk and the angle that the spoke went through the rim was slight off. The holes in the rim would have to be re-drilled I believe. I think the issue was that the bolt circle for the spokes was a larger diameter than the husky hub which changed the spoke angle slightly. Also nipple diameter could be different as well as the countersink angle for the nipples. Look forward to seeing if it works out for ya though!